Floor coatings

Townley paints floor Paint is tough. It'll stand up to bangs knocks, scuffs, scrapes and spills. usable on a few different types of floor. available in our standard range and also British standard and RAL colours to choose from .

Floor paints are available in 2 pack poly urethane ,2 pack epoxy ,solvent free 2 pack epoxy,single pack poly urethane and single pack water based

Features

  • Protects against knocks, scuffs, scrapes and spills

  • Works on wood, concrete and stone floors

  • Easy to apply brush roller or spray

  • High adhesion

  • Anti slip additives available for hazardous areas where extra grip is needed

  • Easy clean

Sort By:  
Solvent Based High Vis Gloss Finish Sealer (DXE3551-HV)

Solvent Based Gloss Finish Sealer High  Viscosity
No.: DXS3551-HV

Hard wearing, solvent based, high solids with good  adhesion.

Colours available : Cear
Appearance Of Dried Film : Gloss
Volume Solids : 28%
   
Theoretical Coverage : 8-10m² per litre
Drying Time At 20°C :
(will vary with temperature, air movements, etc.)
FOOT TRAFIC 3 HRS
FULLY 30 HRS
 
Packaging : /2.5/5/10/20/25 litre containers
Shelf Life : 2 years or longer in unopened containers when stored under cover in good storage conditions.
Storage : Under cover with temperature range of 5°C to 32°C.
Surface Preparation : CLEAN AND DUST FREE
Application : ROLLER, BRUSH OR SPRAY
Thinning Xylene
Clean-up : Gunwash Solvent
Health and Safety : For more information see downloads or contact towneley paints
NOTES
It is important to undertake a representative test area
to ensure that the product is suitable for your require-
ments prior to commencement of the project and as-
sessed for final appearance, chemical resistance and
wet & dry slip resistance. This is particularly important
where the surface has previously been sealed.

 

Q.D Matt Black Enamel (DXS808)

Quick Drying Enamel
No.: DXS7610

alkyd fast drying HIGH gloss finish for general metal work. FAST hardening with good adhesion.

Colours available : All British Standard and RAL colours 
Appearance Of Dried Film : Gloss
Volume Solids : 31%
Dry Film Thickness : Typical 30 microns
Theoretical Coverage : 10.7m² per litre at 30 microns dry film thickness
Drying Time At 20°C :
(will vary with temperature, air movements, etc.)
Touch Dry :15 minutes
Film Dry : 30 minutes
Overcoat : See Note
Packaging : /2.5/5/10/20/25 litre containers
Shelf Life : 2 years or longer in unopened containers when stored under cover in good storage conditions.
Storage : Under cover with temperature range of 5°C to 32°C.
Surface Preparation : Normally applied over suitably primed or degreaed steel.
Suitable primers for steel : HB ZP PRIMER,
Suitable primers for non-ferrous metals : Two-pack Etch PrimerSingle-pack Etch Primer.
Application : Apply by conventional spray. Up to 10% TOWNELEY THINNER XYLENE may be required to achieve optimum spray characteristics.
Overcoating : Should a second coat of 7610 be required, this must be applied within 2 hours of the first coat to avoid lifting or wrinkling of the 7610.
After this 2 hour period, the 7610 will require at least 10 days curing before becoming resistant to solvents in the second coat.
Clean-up : TOWNELEY GUN WASH.
Health and Safety : For more information see downloads or contact towneley paints
   

 

Water Based Semi Gloss Finish Sealer (DXE3551-SG)

Water Based Semi Gloss Finish Sealer
No.: DXE3551-sg

Hard wearing, water based, high solids PU/acrylicgood adhesion.

Colours available : Cear
Appearance Of Dried Film : Gloss
Volume Solids : 28%
   
Theoretical Coverage : 8-10m² per litre
Drying Time At 20°C :
(will vary with temperature, air movements, etc.)
FOOT TRAFIC 3 HRS
FULLY 30 HRS
 
Packaging : /2.5/5/10/20/25 litre containers
Shelf Life : 2 years or longer in unopened containers when stored under cover in good storage conditions.
Storage : Under cover with temperature range of 5°C to 32°C.
Surface Preparation : CLEAN AND DUST FREE
Application : ROLLER, BRUSH OR SPRAY
   
Clean-up : SOAPY WATER
Health and Safety : For more information see downloads or contact towneley paints
NOTES
It is important to undertake a representative test area
to ensure that the product is suitable for your require-
ments prior to commencement of the project and as-
sessed for final appearance, chemical resistance and
wet & dry slip resistance. This is particularly important
where the surface has previously been sealed.

 

Primer finnish Quick drying enamel (DXS3708)

Quick Drying Enamel
No.: DXS7610

alkyd fast drying HIGH gloss finish for general metal work. FAST hardening with good adhesion.

Colours available : All British Standard and RAL colours 
Appearance Of Dried Film : Gloss
Volume Solids : 31%
Dry Film Thickness : Typical 30 microns
Theoretical Coverage : 10.7m² per litre at 30 microns dry film thickness
Drying Time At 20°C :
(will vary with temperature, air movements, etc.)
Touch Dry :15 minutes
Film Dry : 30 minutes
Overcoat : See Note
Packaging : /2.5/5/10/20/25 litre containers
Shelf Life : 2 years or longer in unopened containers when stored under cover in good storage conditions.
Storage : Under cover with temperature range of 5°C to 32°C.
Surface Preparation : Normally applied over suitably primed or degreaed steel.
Suitable primers for steel : HB ZP PRIMER,
Suitable primers for non-ferrous metals : Two-pack Etch PrimerSingle-pack Etch Primer.
Application : Apply by conventional spray. Up to 10% TOWNELEY THINNER XYLENE may be required to achieve optimum spray characteristics.
Overcoating : Should a second coat of 7610 be required, this must be applied within 2 hours of the first coat to avoid lifting or wrinkling of the 7610.
After this 2 hour period, the 7610 will require at least 10 days curing before becoming resistant to solvents in the second coat.
Clean-up : TOWNELEY GUN WASH.
Health and Safety : For more information see downloads or contact towneley paints
   

 

Grey single pack floor paint (DXS1463)

single-pack polyurethane coating typically used as a hard-wearing coating for floors.

Colours available : Grey RAL 7046
Appearance of Dried Film : Gloss
Volume Solids : 50%
Spread Rate : Typically 8m² per litre depending on film thickness applied and surface profile, absorption, etc.
Drying Time At 20°C :
(will vary with temperature, air movements, etc.)
Touch Dry : 3 hours
Film Dry : 6 hours
Overcoat : Overnight (dry for foot traffic after overnight drying)
Packages : 5/20/25 litre tins
Shelf Life : 2 years in unopened containers, when stored under cover in good storage conditions
Storage : Under cover with temperature range of 5°C to 32°C.
Surface Preparation : Previously Painted Floors : Ensure existing coating is firm and sound with good adhesion.
New Concrete : Concrete should be clean, dry and free of 'surface laitence'. Power-floated floors or floors with surface laitence should be prepared by abrasive cleaning .
Thinner white spirit
Allow to dry overnight. Apply one or two coats of unthinned Dac Crete Floor Paint.
Application : Apply by brush or roller.
Clean-up : white spirit
Health and Safety : see downloads
Red oxide single pack floor paint (DXS1371)

single-pack polyurethane coating typically used as a hard-wearing coating for floors.

Colours available :Red Red Oxide
Appearance of Dried Film : Gloss
Volume Solids : 50%
Spread Rate : Typically 8m² per litre depending on film thickness applied and surface profile, absorption, etc.
Drying Time At 20°C :
(will vary with temperature, air movements, etc.)
Touch Dry : 3 hours
Film Dry : 6 hours
Overcoat : Overnight (dry for foot traffic after overnight drying)
Packages : 5/20/25 litre tins
Shelf Life : 2 years in unopened containers, when stored under cover in good storage conditions
Storage : Under cover with temperature range of 5°C to 32°C.
Surface Preparation : Previously Painted Floors : Ensure existing coating is firm and sound with good adhesion.
New Concrete : Concrete should be clean, dry and free of 'surface laitence'. Power-floated floors or floors with surface laitence should be prepared by abrasive cleaning .
Thinner white spirit
Allow to dry overnight. Apply one or two coats of unthinned Dac Crete Floor Paint.
Application : Apply by brush or roller.
Clean-up : white spirit
Health and Safety : see downloads
Per Page      1 - 6 of 6