Enamel and gloss

Enamel paint a very durable, hard finish. Good resistance to petrol, paraffin and mineral oil . Enamel is an excellent choice for painting pieces that will be used outdoors or will otherwise be subjected to heavy wear, such as machines, bicycle frames, banisters, and most industrial steel work.
Available application spray and brush most RAL and British standard Colours available


FEATURES

HIGH GLOSS FINISH

RAPID DRY & RECOAT

SINGLE PACK and two pack Available

EXTENSIVE COLOUR RANGE

 

Sort By:  
Aluminum Primer Bushable (DX9119)

Quick Drying Enamel
No.: DXS7610

alkyd fast drying HIGH gloss finish for general metal work. FAST hardening with good adhesion.

Colours available : All British Standard and RAL colours 
Appearance Of Dried Film : Gloss
Volume Solids : 31%
Dry Film Thickness : Typical 30 microns
Theoretical Coverage : 10.7m² per litre at 30 microns dry film thickness
Drying Time At 20°C :
(will vary with temperature, air movements, etc.)
Touch Dry :15 minutes
Film Dry : 30 minutes
Overcoat : See Note
Packaging : /2.5/5/10/20/25 litre containers
Shelf Life : 2 years or longer in unopened containers when stored under cover in good storage conditions.
Storage : Under cover with temperature range of 5°C to 32°C.
Surface Preparation : Normally applied over suitably primed or degreaed steel.
Suitable primers for steel : HB ZP PRIMER,
Suitable primers for non-ferrous metals : Two-pack Etch PrimerSingle-pack Etch Primer.
Application : Apply by conventional spray. Up to 10% TOWNELEY THINNER XYLENE may be required to achieve optimum spray characteristics.
Overcoating : Should a second coat of 7610 be required, this must be applied within 2 hours of the first coat to avoid lifting or wrinkling of the 7610.
After this 2 hour period, the 7610 will require at least 10 days curing before becoming resistant to solvents in the second coat.
Clean-up : TOWNELEY GUN WASH.
Health and Safety : For more information see downloads or contact towneley paints
   

 

Quick drying enamel (DXS7610)
  



Quick Drying Enamel
No.: DXS7610

alkyd fast drying HIGH gloss finish for general metal work. FAST hardening with good adhesion.

Colours available :All British Standard and RAL colours 
Appearance Of Dried Film :Gloss
Volume Solids :31%
Dry Film Thickness :Typical 30 microns
Theoretical Coverage :10.7m² per litre at 30 microns dry film thickness
Drying Time At 20°C :
(will vary with temperature, air movements, etc.)
Touch Dry :15 minutes
Film Dry : 30 minutes
Overcoat : See Note
Packaging :/2.5/5/10/20/25 litre containers
Shelf Life :2 years or longer in unopened containers when stored under cover in good storage conditions.
Storage :Under cover with temperature range of 5°C to 32°C.
Surface Preparation :Normally applied over suitably primed or degreaed steel.
Suitable primers for steel : HB ZP PRIMER,
Suitable primers for non-ferrous metals : Two-pack Etch PrimerSingle-pack Etch Primer.
Application :Apply by conventional spray. Up to 10% TOWNELEY THINNER XYLENE may be required to achieve optimum spray characteristics.
Overcoating :Should a second coat of 7610 be required, this must be applied within 2 hours of the first coat to avoid lifting or wrinkling of the 7610.
After this 2 hour period, the 7610 will require at least 10 days curing before becoming resistant to solvents in the second coat.
Clean-up :TOWNELEY GUN WASH.
Health and Safety :For more information see downloads or contact towneley paints
  

 

Grey zp primer (DXS3235)

Quick Drying Enamel
No.: DXS7610

alkyd fast drying HIGH gloss finish for general metal work. FAST hardening with good adhesion.

Colours available : All British Standard and RAL colours 
Appearance Of Dried Film : Gloss
Volume Solids : 31%
Dry Film Thickness : Typical 30 microns
Theoretical Coverage : 10.7m² per litre at 30 microns dry film thickness
Drying Time At 20°C :
(will vary with temperature, air movements, etc.)
Touch Dry :15 minutes
Film Dry : 30 minutes
Overcoat : See Note
Packaging : /2.5/5/10/20/25 litre containers
Shelf Life : 2 years or longer in unopened containers when stored under cover in good storage conditions.
Storage : Under cover with temperature range of 5°C to 32°C.
Surface Preparation : Normally applied over suitably primed or degreaed steel.
Suitable primers for steel : HB ZP PRIMER,
Suitable primers for non-ferrous metals : Two-pack Etch PrimerSingle-pack Etch Primer.
Application : Apply by conventional spray. Up to 10% TOWNELEY THINNER XYLENE may be required to achieve optimum spray characteristics.
Overcoating : Should a second coat of 7610 be required, this must be applied within 2 hours of the first coat to avoid lifting or wrinkling of the 7610.
After this 2 hour period, the 7610 will require at least 10 days curing before becoming resistant to solvents in the second coat.
Clean-up : TOWNELEY GUN WASH.
Health and Safety : For more information see downloads or contact towneley paints
   

 

EPOXY Top Coat B.S AND RAL COLOURS (DXT-520)

Quick Drying Enamel
No.: DXS7610

alkyd fast drying HIGH gloss finish for general metal work. FAST hardening with good adhesion.

Colours available : All British Standard and RAL colours 
Appearance Of Dried Film : Gloss
Volume Solids : 31%
Dry Film Thickness : Typical 30 microns
Theoretical Coverage : 10.7m² per litre at 30 microns dry film thickness
Drying Time At 20°C :
(will vary with temperature, air movements, etc.)
Touch Dry :15 minutes
Film Dry : 30 minutes
Overcoat : See Note
Packaging : /2.5/5/10/20/25 litre containers
Shelf Life : 2 years or longer in unopened containers when stored under cover in good storage conditions.
Storage : Under cover with temperature range of 5°C to 32°C.
Surface Preparation : Normally applied over suitably primed or degreaed steel.
Suitable primers for steel : HB ZP PRIMER,
Suitable primers for non-ferrous metals : Two-pack Etch PrimerSingle-pack Etch Primer.
Application : Apply by conventional spray. Up to 10% TOWNELEY THINNER XYLENE may be required to achieve optimum spray characteristics.
Overcoating : Should a second coat of 7610 be required, this must be applied within 2 hours of the first coat to avoid lifting or wrinkling of the 7610.
After this 2 hour period, the 7610 will require at least 10 days curing before becoming resistant to solvents in the second coat.
Clean-up : TOWNELEY GUN WASH.
Health and Safety : For more information see downloads or contact towneley paints
   

 

Q.D Matt Black Enamel (DXS808)

Quick Drying Enamel
No.: DXS7610

alkyd fast drying HIGH gloss finish for general metal work. FAST hardening with good adhesion.

Colours available : All British Standard and RAL colours 
Appearance Of Dried Film : Gloss
Volume Solids : 31%
Dry Film Thickness : Typical 30 microns
Theoretical Coverage : 10.7m² per litre at 30 microns dry film thickness
Drying Time At 20°C :
(will vary with temperature, air movements, etc.)
Touch Dry :15 minutes
Film Dry : 30 minutes
Overcoat : See Note
Packaging : /2.5/5/10/20/25 litre containers
Shelf Life : 2 years or longer in unopened containers when stored under cover in good storage conditions.
Storage : Under cover with temperature range of 5°C to 32°C.
Surface Preparation : Normally applied over suitably primed or degreaed steel.
Suitable primers for steel : HB ZP PRIMER,
Suitable primers for non-ferrous metals : Two-pack Etch PrimerSingle-pack Etch Primer.
Application : Apply by conventional spray. Up to 10% TOWNELEY THINNER XYLENE may be required to achieve optimum spray characteristics.
Overcoating : Should a second coat of 7610 be required, this must be applied within 2 hours of the first coat to avoid lifting or wrinkling of the 7610.
After this 2 hour period, the 7610 will require at least 10 days curing before becoming resistant to solvents in the second coat.
Clean-up : TOWNELEY GUN WASH.
Health and Safety : For more information see downloads or contact towneley paints
   

 

Brushable enamel (DXS7030)

Quick Drying Enamel
No.: DXS7610

alkyd fast drying HIGH gloss finish for general metal work. FAST hardening with good adhesion.

Colours available : All British Standard and RAL colours 
Appearance Of Dried Film : Gloss
Volume Solids : 31%
Dry Film Thickness : Typical 30 microns
Theoretical Coverage : 10.7m² per litre at 30 microns dry film thickness
Drying Time At 20°C :
(will vary with temperature, air movements, etc.)
Touch Dry :15 minutes
Film Dry : 30 minutes
Overcoat : See Note
Packaging : /2.5/5/10/20/25 litre containers
Shelf Life : 2 years or longer in unopened containers when stored under cover in good storage conditions.
Storage : Under cover with temperature range of 5°C to 32°C.
Surface Preparation : Normally applied over suitably primed or degreaed steel.
Suitable primers for steel : HB ZP PRIMER,
Suitable primers for non-ferrous metals : Two-pack Etch PrimerSingle-pack Etch Primer.
Application : Apply by conventional spray. Up to 10% TOWNELEY THINNER XYLENE may be required to achieve optimum spray characteristics.
Overcoating : Should a second coat of 7610 be required, this must be applied within 2 hours of the first coat to avoid lifting or wrinkling of the 7610.
After this 2 hour period, the 7610 will require at least 10 days curing before becoming resistant to solvents in the second coat.
Clean-up : TOWNELEY GUN WASH.
Health and Safety : For more information see downloads or contact towneley paints
   

 

Primer finnish Quick drying enamel (DXS3708)

Quick Drying Enamel
No.: DXS7610

alkyd fast drying HIGH gloss finish for general metal work. FAST hardening with good adhesion.

Colours available : All British Standard and RAL colours 
Appearance Of Dried Film : Gloss
Volume Solids : 31%
Dry Film Thickness : Typical 30 microns
Theoretical Coverage : 10.7m² per litre at 30 microns dry film thickness
Drying Time At 20°C :
(will vary with temperature, air movements, etc.)
Touch Dry :15 minutes
Film Dry : 30 minutes
Overcoat : See Note
Packaging : /2.5/5/10/20/25 litre containers
Shelf Life : 2 years or longer in unopened containers when stored under cover in good storage conditions.
Storage : Under cover with temperature range of 5°C to 32°C.
Surface Preparation : Normally applied over suitably primed or degreaed steel.
Suitable primers for steel : HB ZP PRIMER,
Suitable primers for non-ferrous metals : Two-pack Etch PrimerSingle-pack Etch Primer.
Application : Apply by conventional spray. Up to 10% TOWNELEY THINNER XYLENE may be required to achieve optimum spray characteristics.
Overcoating : Should a second coat of 7610 be required, this must be applied within 2 hours of the first coat to avoid lifting or wrinkling of the 7610.
After this 2 hour period, the 7610 will require at least 10 days curing before becoming resistant to solvents in the second coat.
Clean-up : TOWNELEY GUN WASH.
Health and Safety : For more information see downloads or contact towneley paints
   

 

Water Based Gloss Finish Sealer (DXE3551)

Water Based Gloss Finish Sealer
No.: DXE3551

Hard wearing, water based, high solids PU/acrylicgood adhesion.

Colours available : Cear
Appearance Of Dried Film : Gloss
Volume Solids : 28%
   
Theoretical Coverage : 8-10m² per litre
Drying Time At 20°C :
(will vary with temperature, air movements, etc.)
FOOT TRAFIC 3 HRS
FULLY 30 HRS
 
Packaging : /2.5/5/10/20/25 litre containers
Shelf Life : 2 years or longer in unopened containers when stored under cover in good storage conditions.
Storage : Under cover with temperature range of 5°C to 32°C.
Surface Preparation : CLEAN AND DUST FREE
Application : ROLLER, BRUSH OR SPRAY
   
Clean-up : SOAPY WATER
Health and Safety : For more information see downloads or contact towneley paints
NOTES
It is important to undertake a representative test area
to ensure that the product is suitable for your require-
ments prior to commencement of the project and as-
sessed for final appearance, chemical resistance and
wet & dry slip resistance. This is particularly important
where the surface has previously been sealed.

 

Solvent Based Semi Gloss Finish Sealer (DXE3551-SG)

Solvent Based Semi Gloss Finish Sealer
No.: DXS3551

Hard wearing, solvent based, high solids with good  adhesion.

Colours available : Cear
Appearance Of Dried Film : Gloss
Volume Solids : 26%
   
Theoretical Coverage : 8-10m² per litre
Drying Time At 20°C :
(will vary with temperature, air movements, etc.)
FOOT TRAFIC 3 HRS
FULLY 30 HRS
 
Packaging : /2.5/5/10/20/25 litre containers
Shelf Life : 2 years or longer in unopened containers when stored under cover in good storage conditions.
Storage : Under cover with temperature range of 5°C to 32°C.
Surface Preparation : CLEAN AND DUST FREE
Application : ROLLER, BRUSH OR SPRAY
Thinning Xylene
Clean-up : Gunwash Solvent
Health and Safety : For more information see downloads or contact towneley paints
NOTES
It is important to undertake a representative test area
to ensure that the product is suitable for your require-
ments prior to commencement of the project and as-
sessed for final appearance, chemical resistance and
wet & dry slip resistance. This is particularly important
where the surface has previously been sealed.

 

Grey single pack floor paint (DXS1463)

single-pack polyurethane coating typically used as a hard-wearing coating for floors.

Colours available : Grey RAL 7046
Appearance of Dried Film : Gloss
Volume Solids : 50%
Spread Rate : Typically 8m² per litre depending on film thickness applied and surface profile, absorption, etc.
Drying Time At 20°C :
(will vary with temperature, air movements, etc.)
Touch Dry : 3 hours
Film Dry : 6 hours
Overcoat : Overnight (dry for foot traffic after overnight drying)
Packages : 5/20/25 litre tins
Shelf Life : 2 years in unopened containers, when stored under cover in good storage conditions
Storage : Under cover with temperature range of 5°C to 32°C.
Surface Preparation : Previously Painted Floors : Ensure existing coating is firm and sound with good adhesion.
New Concrete : Concrete should be clean, dry and free of 'surface laitence'. Power-floated floors or floors with surface laitence should be prepared by abrasive cleaning .
Thinner white spirit
Allow to dry overnight. Apply one or two coats of unthinned Dac Crete Floor Paint.
Application : Apply by brush or roller.
Clean-up : white spirit
Health and Safety : see downloads
Aluminum Exhaust (DXS1699)

Quick Drying Enamel
No.: DXS7610

alkyd fast drying HIGH gloss finish for general metal work. FAST hardening with good adhesion.

Colours available : All British Standard and RAL colours 
Appearance Of Dried Film : Gloss
Volume Solids : 31%
Dry Film Thickness : Typical 30 microns
Theoretical Coverage : 10.7m² per litre at 30 microns dry film thickness
Drying Time At 20°C :
(will vary with temperature, air movements, etc.)
Touch Dry :15 minutes
Film Dry : 30 minutes
Overcoat : See Note
Packaging : /2.5/5/10/20/25 litre containers
Shelf Life : 2 years or longer in unopened containers when stored under cover in good storage conditions.
Storage : Under cover with temperature range of 5°C to 32°C.
Surface Preparation : Normally applied over suitably primed or degreaed steel.
Suitable primers for steel : HB ZP PRIMER,
Suitable primers for non-ferrous metals : Two-pack Etch PrimerSingle-pack Etch Primer.
Application : Apply by conventional spray. Up to 10% TOWNELEY THINNER XYLENE may be required to achieve optimum spray characteristics.
Overcoating : Should a second coat of 7610 be required, this must be applied within 2 hours of the first coat to avoid lifting or wrinkling of the 7610.
After this 2 hour period, the 7610 will require at least 10 days curing before becoming resistant to solvents in the second coat.
Clean-up : TOWNELEY GUN WASH.
Health and Safety : For more information see downloads or contact towneley paints
   

 

Solvent Based Gloss Finish Sealer (DXE3551)

Solvent Based Gloss Finish Sealer
No.: DXS3551

Hard wearing, solvent based, high solids with good  adhesion.

Colours available : Cear
Appearance Of Dried Film : Gloss
Volume Solids : 26%
   
Theoretical Coverage : 8-10m² per litre
Drying Time At 20°C :
(will vary with temperature, air movements, etc.)
FOOT TRAFIC 3 HRS
FULLY 30 HRS
 
Packaging : /2.5/5/10/20/25 litre containers
Shelf Life : 2 years or longer in unopened containers when stored under cover in good storage conditions.
Storage : Under cover with temperature range of 5°C to 32°C.
Surface Preparation : CLEAN AND DUST FREE
Application : ROLLER, BRUSH OR SPRAY
Thinning Xylene
Clean-up : Gunwash Solvent
Health and Safety : For more information see downloads or contact towneley paints
NOTES
It is important to undertake a representative test area
to ensure that the product is suitable for your require-
ments prior to commencement of the project and as-
sessed for final appearance, chemical resistance and
wet & dry slip resistance. This is particularly important
where the surface has previously been sealed.

 

Per Page      1 - 12 of 12